20050103-allegro-01-glassjoiner:
(Sorry for the long pause! I had to order more kevlar from CST, and then built my rudder and elevator, and then the holidays...)
The next step is to start to wrap the spars and joiner box with kevlar. However, to prevent a "burst failure", you need to wrap the joiner box with 2oz. fiberglass wetted with epoxy. Here I've cut a piece of glass the width of the joiner box, and then I cut it in half.
20050103-allegro-01-glassjoiner:
(Sorry for the long pause! I had to order more kevlar from CST, and then built my rudder and elevator, and then the holidays...)
The next step is to start to wrap the spars and joiner box with kevlar. However, to prevent a "burst failure", you need to wrap the joiner box with 2oz. fiberglass wetted with epoxy. Here I've cut a piece of glass the width of the joiner box, and then I cut it in half.