20041127-allegro-04-hardwoodsandingjig:
To ensure flat tops and bottoms and a good 6 degree face, I made a small sanding jig on my work-surface. This was just a piece of hardwood CA'd to the glass. Also, a scrap piece of hardwood with a 6 degree face was employed.
20041127-allegro-04-hardwoodsandingjig:
To ensure flat tops and bottoms and a good 6 degree face, I made a small sanding jig on my work-surface. This was just a piece of hardwood CA'd to the glass. Also, a scrap piece of hardwood with a 6 degree face was employed.