20041127-allegro-02-joineruncutandcut:
After I got the basswood sanded "just so", I used a razor-saw and cut the width of the 1/2" wide pieces down to the 3/8" width needed for the spar. The leftmost piece in the photo is 1/4", the right is 3/8".
Image may be NSFW.
Clik here to view.
20041127-allegro-02-joineruncutandcut:
After I got the basswood sanded "just so", I used a razor-saw and cut the width of the 1/2" wide pieces down to the 3/8" width needed for the spar. The leftmost piece in the photo is 1/4", the right is 3/8".
